A person excited about agriculture would understand the joy of seeing the first little bud or a blooming flower. The positive effects of gardening go beyond enhancing the aesthetic appeal of your home – they work wonders on a person’s respiratory health. They are associated with mood enhancement and stress reduction. Gardening is a long-term activity demanding commitment and an understanding of each plant’s requirements. Some common gardening mistakes that one must avoid are listed below.

Using too much or too little mulch
Mulch is essential for plants to obtain the required nutrients for healthy growth. However, adding too much or too little mulch can prevent the plant from thriving, as mulch contains nitrogen, and excessive nitrogen levels can harm plants. In contrast, adding too little mulch can deprive the plant of the required nutrition. Thus, gardeners should understand the amount of mulch plants need for healthy development.

Treating all plants the same way
A common mistake several gardeners make is to treat all their plants equally. One size doesn’t fit all, even when it comes to plants. It is important to know the differences in each plant’s requirements and cater to them accordingly. For example, some houseplants, like lucky bamboo, survive in dryer conditions and should not be watered every day, whereas others, like dwarf rose, must be watered daily to survive. Seasoned gardeners understand what every plant needs.

Not considering the climatic conditions while choosing plants
The growth and blossoming of plants depend mainly on the climatic conditions of an area. For example, poppies, European roses, and Alpine plants will not be able to survive in tropical climates, as they require cold climatic conditions to thrive. In contrast, other plants like okra, tomatoes, peppers, and basil require abundant sunlight and cannot sustain in cold conditions. Thus, gardeners must consider the climatic conditions of their area while deciding what plants to grow.

Choosing the wrong spot to grow plants
Some areas of a garden or balcony may not receive the same amount of sunlight as others. Choosing the wrong spot to grow plants can cause them to become weaker with time and eventually wither due to insufficient sunlight. So, it is imperative to designate a spot with adequate sunlight to ensure that plants remain healthy.

Not removing the weeds frequently
Weeds can take up space in the garden and compete with the plant for sunlight, water, and nutrients. With time, weeds may cause plants to grow weak and lack essential nutrients. Therefore, gardeners should remove weeds from time to time. One can set reminders for removing weeds if required.

Avoiding crop rotation
Crop rotation helps retain soil nutrients without needing synthetic fertilizers and other inputs. Therefore, it should be an essential process in gardens to enhance soil health and increase biodiversity.

Not planting flowers that attract pollinators
Pollination is an essential process for plants to produce fruits and seeds. Bees, flies, beetles, and butterflies are common pollinators attracted by plants like sunflowers, lavender, cuphea, and calendula. Gardens should include at least 2-3 plants that attract pollinators.

Not leaving sufficient space between plants
Growing plants in congested environments can hamper plant growth and prevent each plant from receiving adequate nutrients. It can also increase the susceptibility of plants to contracting diseases. Therefore, growing plants 18-24 inches apart in gardens is advisable to ensure the space is not congested.

Placing plants too deeply into the soil
When transferring plants from pots to the garden, it is important to plant them only as deep as they were rooted in the pot. If mulch must be added, it should be placed an inch above ground level. Planting them too deeply in the soil can cause them to weaken and die early.

Pruning too early
While pruning is an essential aspect of gardening, over-pruning or pruning before time may cause one to remove the buds off their branches. Consequently, there may be no flowers in the plant during spring; therefore, it is important to be patient and prune only during spring.

Using too many chemical fertilizers
Chemical fertilizers may help ward off pests and insects; however, they may destroy the plants over time and harm health if any part of such plants is eaten. Therefore, it is advisable to replace chemical fertilizers with organic ones and use fertilizers only if the plants require them.

Working on wet soil
According to experts, working on wet soil can destroy its structure, requiring long recovery periods. So, it is important to wait for the soil to dry a little and begin working it when it is moist but not too wet.

Not harvesting ripe fruits, vegetables, and flowers
It is best to harvest fruits, vegetables, and flowers on time when they are ripe and ready. Leaving them on the plant can cause them to wither or rot eventually and become food for birds and insects.

Not experimenting with different gardening styles and plants
Stepping out of their comfort zone can help gardeners understand the skill better, as each plant has specific gardening requirements. It can serve as an enriching learning experience for gardeners and help them master the skill of gardening “on the field.”

Maintaining a healthy home garden is a hands-on task. You need to consider everything from the ideal weather to the best supplements for stimulating plant growth. This also includes getting rid of weeds—plant killers that can be a nuisance and prevent you from maintaining a lush, green outdoor space. So, you should keep an eye out for weeds and stop their growth. Here are 6 useful tips for managing and preventing weed growth:

Identify the type of weed
You may think all weeds are bad and should be removed. But it is important to identify the type so that you can choose the most effective countermeasures. For instance, many types of weeds are unaffected by pesticides and sprays. So, to avoid wasting time, first, you should try to identify the type of weed growing in your backyard. For example, broadleaf weeds grow flat and are not grassy or needle-like. Common examples here could be dandelions, clovers, or ground ivy. Grassy weed is a more common type that resembles regular grass but is easily identifiable due to its distinctive growth pattern. If you spot triangular or tube-like weeds that are not as flat as the blades of the grass, then these are regular wild creepers.

Use a potent spray
Some growths, like crabgrass, persist and dominate the entire garden. Crabgrass is an annual weed that thrives in hot and humid weather and targets barren spots in the garden. The weed can ruin the look of the garden and potentially produce over 150,000 seeds for a single plant during the growing season. One of the best ways to target its growth is by using Preen® Lawn Crabgrass Control. This product comes with pre- and post-emergent action to counter crabgrass overgrowth. The dual action formula comes in a granular form and is potent for 4 months after it has been applied. Alternatively, if you are looking for the best plant killer sprays, you can try the Spectracide Weed Stop for Lawns, which is effective against 470 different types of weed growth. The spray covers up to 5,000 square feet and works well in both warm and cold climates. You can find several crabgrass killer products today intended for use in different temperatures and climates.

Manually pull out the weeds
Many types of weeds are resistant to chemical sprays. Here, manually yanking the overgrowth by the root can prevent the weeds from sprouting seeds and germinating. There are many techniques you can choose, like hand pulling—a popular technique where you identify the patches of weed growth and pull out the baby plants before they mature. But this is the most labor-intensive technique and is advisable only if you are dealing with smaller patches of weed growth. Alternatively, you can also use a weeder tool to get more control and exert minimal force while pulling out the weeds. Or, a scuffle hoe can help you tackle larger patches of overgrowth. Scuffle hoes can burrow deep and cut the plant at the roots while pulling a large patch of overgrowth in a single action. You can save time and effort by using such tools in the process. You can even apply a layer of herbicides or plant-killer sprays to tackle leftover roots.

Use organic herbicides
Herbicides are potent sprays that can control the growth of weeds around plants. These liquids come in handy in places where it is not possible to manually remove weeds. It is better to use organic herbicides that naturally kill the weed plants and avoid damaging any other growths in the vicinity. Corn gluten is a popular compound used to control the overgrowth of crabgrass and different types of lawn weeds. You can also consider a white vinegar-based herbicide to counter fast-growing weeds.

Try flame weeders
If you tend to your garden often, then a flame weeder to destroy weed growth can be a suitable option. This tool is designed to wipe out excess weed growth by torching the grass and burning off the excess in small patches. But the technique does not destroy the roots, so you will have to use the flame weeder several times in a growth cycle to properly tackle and address the problem. On the one hand, burnt weeds can be used as a supplement as it replenishes the soil with nutrients to aid the growth of healthy plants. Flaming also gets rid of pests that can thrive among the weeds.

Water just the cultivated plants
One of the common mistakes among first-time gardeners is watering the entire garden. But here, you are simply providing additional nourishment to the weeds along with the plants. Weeds mostly grow in patches, so you can strategically deprive these growths of all forms of nourishment. Over time, the weeds will wither away, leaving behind a clean patch ready for new plants. You can place drip soakers around plants and vegetation and deprive the weeds of any nutrition. While this does not ensure the complete removal of harmful weeds, it will still them from growing and starve the smaller weeds before they mature and deprive healthy plants of all nutrition.

A lush green lawn is a dream for most homeowners. However, one must put in the effort and follow a lawn maintenance routine. In most cases, lawn care is a mix of daily and weekly tasks. You can either do them yourself or hire professionals. Furthermore, you can follow a few tips to ease the process and keep your lawn green all year round. Keep reading for tips to keep your lawn healthy.

Tips to ensure a green and healthy lawn

Watering the lawn when dry
While this tip might seem obvious, watering your lawn is one of the best ways to maintain it. In most scenarios, when you thoroughly water your lawn, it contributes to strong and deep roots. These strong roots are the key to ensuring the grass grows healthy. Furthermore, you must remember that the stronger the roots, the more nutrients the grass can absorb from the soil, thus allowing the growth of lush, green, and healthy grass. Some of the best times to water your lawn include early in the morning before sunrise or in the evening after sunset.

Mowing the grass every week
One of the best tips to keep your lawn healthy includes regular mowing of the grass. As a standard practice, you must mow your lawn once a week in the summer and spring seasons. However, during the other months, you may need to adjust the frequency of lawn mowing depending on factors such as local climate and weather conditions. In addition to the above, you must ensure the lawn is mowed early in the evening. It ensures that the grass is moisturized.

Using sprinklers in the mornings
Another critical component that ensures a healthy lawn is sprinkling. While watering your lawn daily is not required, you must water it at least twice or thrice a week. Furthermore, if you wish to make the most of your time and other resources, you can use a sprinkler system that covers your entire lawn. Using this system, you can schedule the frequency of watering the lawn. However, for the best results, you must time the sprinkler system early, anywhere between 6 AM to 10 AM.

Keeping the grass high
The taller the grass, the healthier the lawn. So one of the tips that can be used to keep your lawn healthy is to keep the grass length 3 inches or taller. These long blades of grass make way for deeper roots, which are incredibly important to keep the lawn healthy. You must also avoid cutting more than one-third of the grass’ height. In addition to the above, the mower blades must remain sharp to avoid problems such as tears and frayed brown edges.

Training your pets to use a smaller area
Usually, homeowners with pets may notice yellow or dead spots in their lawn grass, which can prove to be a mess in an otherwise healthy lawn. These are the areas that the pets probably use to relieve themselves. To ensure a healthy lawn, you can set aside a designated lawn area for the pets. Afterward, you can train your furry friend to relieve themselves in that particular space to avoid damage to other areas of the lawn. It is best if the designated area is shady and hidden from view.

Investing in weed control
Most homeowners face a range of issues while trying to keep weeds away. However, you can employ a few basic lawn maintenance principles to help control the growth of weeds. As mentioned earlier, this can include weekly mowing, deep watering, and fertilizing. However, there are some varieties of weed species, such as crabgrass and broadleaf weeds, which can be hard to control. In such circumstances, you can use the best plant killer spray – Roundup® For Lawns- to effectively remove the toughest crabgrass and broadleaf weeds without damaging your lawn.

Fertilizing the lawn regularly
While the tips above can help keep your lawn healthy, it is also advised to invest in good-quality fertilizers to produce thick grass. It ensures that the soil remains cool, thus preventing the growth of weeds in the lawn. However, you must remember that most fertilizers are a mix of nitrogen, phosphorus, and potassium. These should typically be present in a 3:1:2 ratio. In addition to using fertilizers, you can allow the clippings to remain in the soil after mowing. These clippings can act as compost and release vital nutrients and nitrogen to improve soil health and keep your lawn green naturally.

Getting the soil tested
One of the most effective tips to help keep your lawn healthy is learning more about the soil. While regular mowing, fertilizing, and watering can deliver excellent results, a professional soil test can provide additional details about the health of the soil in your lawn. In most scenarios, these tests show the pH balance of the soil as well as its nutrient level. Learning more about these can help you ascertain the next steps that can be adopted for a healthier lawn.

Besides employing the abovementioned tips, you can also use the help of professional lawn care services to maintain your lawn and keep it lush green all year round. However, review factors such as their reputation, license, experience, and customer service before choosing a service provider.

The bathroom is one of the hotspots of germs and bacteria, which can lead to the spread of health problems like urinary tract infections, hepatitis A, and Salmonellosis. A clean bathroom is the indicator of a healthy, hygienic home. Several multipurpose cleaners and equipment are available to facilitate clean bathrooms with minimal effort. However, avoiding some common bathroom cleaning mistakes is essential to enhance the effectiveness of such cleaners and ensure a spic-and-span bathroom.

Not using different sponges for each surface
A sponge absorbs dust and dirt from the surfaces that it cleans. Therefore, using the same sponge to clean different surfaces does not help remove germs and bacteria from the bathroom; rather, it only transfers them from one surface to another. For this reason, one should use different sponges to clean each bathroom surface.

Forgetting to clean the toothbrush holder
A study by the National Sanitation Foundation listed the toothbrush holder as the third grimiest and germ-filled area in one’s home. Toothbrush holders are often unclean because wet toothbrushes are directly placed inside them. Consequently, the toothbrushes drip inside the holder, which collects bacteria and germs over time. Hence, toothbrush holders should be cleaned frequently to facilitate a germ-free bathroom.

Leaving spray-and-go cleansers on surfaces for long
Spraying cleansers on surfaces and not wiping them immediately can cause them to stick to the surfaces. Such cleansers can additionally breed bacteria and dust, leading to an unhygienic bathroom. Thus, spray-and-go cleansers must be wiped off surfaces within two minutes of spraying.

Using the same products for all bathroom surfaces
This is one of the most common bathroom cleaning mistakes to avoid. Every surface in the bathroom entails a different texture and has distinct cleaning requirements. For example, an abrasive surface cleaner should be used to remove molds or scum accumulated on a surface, whereas non-abrasive or mild cleaners are best suited for bathtubs and tiles. Abrasive cleaners should particularly be avoided on surfaces made of glass, metal, ceramic, plastic, and other such delicate materials.

Not cleaning the exhaust fan
An unclean exhaust fan can prevent air from passing through the duct and lead to the development of mildew and mold in the bathroom over time due to excessive moisture. Thus, cleaning the exhaust fan should be a part of one’s bathroom-cleaning process.

Forgetting to clean the bath mat
Bath mats are exposed to moisture around the clock and tend to collect bacteria, dust, and germs over time. However, a common bathroom-cleaning mistake is to forget cleaning the bath mat. Most bathroom mats can be cleaned using a washing machine. While selecting a bath mat, it is important to avoid ones that are not conducive to high temperatures, particularly if one is living in a region experiencing frequent humidity.

Mixing cleaning products
Mixing certain cleaning products can produce harmful chemicals and should be avoided. For example, mixing bleach and vinegar can lead to health repercussions like coughing, watery eyes, and breathing problems, while chloramine, the solution obtained by mixing together bleach and ammonia, can cause chest pain and shortness of breath. Thus, it is best to use such products in isolation or purchase cleaning solutions from reputed brands to avoid the negative consequences.

Not washing the shower curtain
Another common bathroom cleaning mistake is to overlook the importance of washing the shower curtain. The bathroom typically contains high levels of moisture, which can lead to the accumulation of mildew and mold. Thus, it is advisable to wash shower curtains at least four times a year.

Not dusting before cleaning
Dusting is a preliminary step before beginning the cleaning process because directly cleaning the bathroom surfaces can cause dust particles to circulate around the room and lead to allergies. Dry dust should be removed using a feather duster or microfiber towel before proceeding with the cleaning process.

Missing the bathroom corners
The corners are where dust and bacteria typically collect the most. Ignoring the corners of the bathroom leads to an incomplete cleaning process. It is ideal to clean bathroom corners with small, narrow brushes entailing long handles, which can easily navigate narrow spaces and remove the accumulated dust.

Ignoring excessive grout
Grout refers to the fluid that is used to fill in the gaps between tiles. It typically comprises water, sand, and cement and is required to hold tiles together. However, excessive grout accumulation can cause it to crumble and litter the floor of the bathroom. It is best to remove such grout from the tiles. A power tool may be used to remove excessive grout with ease.

Not using the exhaust fan
An exhaust fan helps remove moisture from the bathroom and prevents mildew and mold formation. Thus, it is important to use the exhaust fan during and after one’s bath to ensure the bathroom is clean and tidy.

Not cleaning the toilet brush
Although the toilet brush is an obvious Petri dish for bacteria and germs, most individuals overlook cleaning it. It is important to clean the toilet brush regularly by soaking it in bleach or ammonia solution for an hour.

Keeping the bathroom cluttered
A cluttered bathroom can cause chaos, leading to spillage and making the cleaning process tedious. A minimalist bathroom has all the necessary products, is well-organized, and does not contain excessive products. It is important to declutter the bathroom regularly and dispose of used bottles and other unwanted items so that the bathroom can be easily cleaned.

Moving houses is a major undertaking that demands a lot of time and money. It is nearly impossible not to experience any hiccups during the move. But one can always consider and prepare for different aspects of moving to make the process as smooth as possible. One way to do this is to make a checklist and avoid common moving mistakes that may end up costing more than expected.

Not hiring professional service
Taking the help of family and friends to move houses and save money can turn out to be costly in the long run. The full-service moving companies are equipped professionally to handle packing, moving, and setting up of delicate items as well as heavy furniture without damage. Additionally, they have better infrastructure, trained labor, and insurance provision. In the absence of all this, moving can turn out to be a risky and time-consuming affair, and one may eventually end up stressing and making more mistakes.

Packing too late
One can easily underestimate the time required for packing. If pushed until the end, this time-consuming act can propel one to make costly mistakes. For example, one may forget to forfeit one’s security deposit at the old place or damage or misplace items in haste.

Packing essentials too early
Packing essentials months in advance is not advisable. One may have to open up an entire package to retrieve a missing t-shirt or fry pan that’s already sealed. Alternatively, to avoid unpacking, one can buy essential items and end up spending unnecessarily. The best way is to start with packing out-of-season and non-essential items.

Packing in the wrong containers
Different house items require appropriate containers, like paper boxes, waterproof and lightweight plastic bins, polybags, woven sacks, and more. Stacking paintings or clothes and sharp cutlery or stationary in the same box, for example, may make them more vulnerable to getting damaged in transit.

Not paying for moving insurance
Most movers include insurance in their moving contracts, but some may offer basic limited liability protection. If a company doesn’t offer insurance or doesn’t cover all valuables, it’s advisable to get additional insurance from a third-party provider. Taking adequate coverage for items that are expensive or may get harmed during transit can help one to save money.

Handing over valuables to movers
Small valuable items are likely to get lost or stolen while moving. Irrespective of whether one trusts the hired personnel, it’s best to personally pack and move valuable possessions, so one does not meet with any financial losses.

Assuming all companies cheat
Another common mistake is to assume that all movers may either cheat or steal from one. This can lead one to do most of the moving work alone and cost more, both time and money-wise. It’s best to take references from people and read customer reviews on different movers to shortlist trustworthy and honest companies. Many professional companies offer budget moving and in-house services even for long distances.

Moving in the peak of the season
This may not always be possible in case of emergencies. But if one has the freedom to choose, one can move during off seasons like holidays or wintertime. Summers are a busy time for moving and packing companies. One may struggle to find the preferred company or time slot, and the prices may also be higher than usual. So, one can choose September to May for moving houses. Making an earlier reservation with the company can also help one to explore more options in terms of companies, available time slots, and obtaining the best rates.

Not planning for packing materials
Underestimating the quantity of packing material required, including boxes and tape, or fetching them at the last minute, may end up wasting one’s time. One can ask a moving company to estimate one’s packing requirements. Since these materials are for temporary use, one way of saving money here is to plan in advance. One can buy boxes during festive offers and even ask friends and family to save their packing material for you if any.

Not labeling the boxes properly
Ignoring the chore of labeling boxes is a surefire way to waste time. It is advisable to label fragile items and boxes depending on the rooms they belong in. This makes it easier for the movers to place them appropriately in the new house. One can also number all the boxes to ensure that everything has been transported.

Not packing valuables and breakable items properly
One’s advised to bubble wrap and use padding for glass cutlery to avoid breaking them during transit. Similarly, one can save a safe space for expensive jewelry and other valuable items to avoid misplacing them.

Not measuring the furniture correctly
One is advised to measure the furniture space, floor plan, doorways height, and staircases in the new home correctly. This enables the helpers to move furniture pieces like appliances, bookcases, wardrobes, dressers and others easily.

Not securing parking permits
The movers’ truck or vehicle tends to occupy significant road space until the moving is complete. So, it’s best to get the parking permit for the same well in advance to avoid last-minute paperwork and procedure.

Not asking for an estimate
Before using the movers’ services or packing up, it is advisable to ask the movers for a breakdown of the estimate. This can assist one in budgeting for various expenditures, such as moving supplies and unforeseen transit problems.

Waterproofing is a process to safeguard certain areas or surfaces in their homes from water damage. Therefore, houses in rainfall-prone regions can benefit from it. Waterproofing is also helpful in plugging any wall cracks, leaks, or mold growth. Waterproofing can be done using specialized coatings, sealants, and membranes. Here are some key factors to consider before waterproofing one’s house, including types of waterproofing, local waterproofing cost estimates, advantages of the process, and other important aspects:

Types of waterproofing
Although there can be further classifications for the same, there are three generally accepted types of waterproofing for the house, including:

Exterior waterproofing
Exterior waterproofing is an effective way to prevent water leakage in the basement. Generally, people should hire experienced contractors to do external waterproofing for them as the process is more complex than interior waterproofing. The soil around a given property is excavated for external waterproofing, requiring specialized tools and machinery. After that, waterproofing workers use a polymer base sealant to prevent water leakage.
Generally, residential builders tend to do exterior waterproofing, but the waterproofing lasts for several years.

Interior waterproofing
Exterior waterproofing tends to be an expensive affair. In contrast, interior waterproofing is much more affordable. This enables people to carry out interior waterproofing multiple times in a few years. Interior waterproofing includes sealing water entryways on doors, floors, wall cracks, and windows. Workers use sealants with extended warranties (for long-term effectiveness) for the purpose.

Waterproofing companies use coatings on basement floors and walls to prevent water and moisture from seeping into one’s house. However, interior waterproofing is not as long-lasting as exterior waterproofing.

Drainage system waterproofing
Poor waterproofing in the drainage system can result in the basement being flooded with water during heavy rains. Therefore, most waterproofing experts suggest homeowners carry out waterproofing for their drainage systems to prevent groundwater or rainwater from their drainage systems. These waterproofing solutions tend to be customized in nature as different homes and terrain need distinctive waterproofing strategies.
Apart from waterproofing, one also needs to pay attention to other aspects, such as building drainage systems so that it slopes away from the property’s main foundation. Additionally, gutters and sewage pipes must be constructed to drain water from the house regularly.

Advantages of waterproofing
There are several reasons to get one’s house completely waterproofed. Some of the primary benefits of waterproofing include the following:

Protects against water damage
This is the most apparent benefit of the entire exercise. Waterproofing companies use unique products that create a solid barrier between one’s home and external moisture and water to protect homes from water damage. Apart from protecting the walls and flooring from water leakage, waterproofing can also involve the installation of downspouts and gutters to direct water away from one’s home.

Prevents structural damage to the home
If water seeps into the property’s foundations, it can cause cracks, rusting of internal metallic elements, and buckling of walls. This significantly damages the structural integrity of one’s home. If not addressed on time, this problem can cause houses to collapse. As a result, waterproofing is not just a luxury but an essential nowadays. Interior and exterior waterproofing add structural integrity to the house.

Increases the value of property
Waterproofing makes the house impervious to water leakage. In a way, it improves the quality of any given property. This is why waterproof homes are more attractive to potential buyers. Buyers opt for waterproof homes, so they do not need to spend on the same. Waterproofing is a solid home improvement project that can be considered a wise investment for tangible and sustainable long-term returns.

Saves money on energy bills
Poor waterproofing is one of the lesser-known reasons for exorbitant energy bills across the country. When a house has not been waterproofed for many years, or if it was done poorly in the first place, the heat or air from one’s air conditioning system escapes through the walls or flooring. By preventing this through waterproofing, one can lower energy costs annually.

Reduces asthma symptoms and allergies
Waterproofing can help reduce mold, pests, germ particles, and mildew, as the process is usually accompanied by extensive property cleansing. As a result, waterproofing creates a healthier environment and eliminates the triggers of asthma and allergic reactions within one’s house.

Average waterproofing costs
While service costs tend to differ from one waterproofing company to another, local waterproofing cost estimates place service expenses in the range of $1,500 to $4,250 for basement waterproofing. In addition, some operations can set back homeowners by as much as $10,000.

Best waterproofing companies
Some of the most well-known and reliable waterproofing companies are listed here:

Everydry Waterproofing
This is one of the most commonly used services. Everydry waterproofing is known for its reliable services, with over 80,000 basements, slab homes, and crawl spaces waterproofed. This service also provides hyper-customized solutions for each client and a one-on-one approach to customer service.

The Basement Doctor
The Basement Doctor offers its services in several regions across the country. Like Everydry Waterproofing, this company is known for its professional and personalized services for each client and property type.

Concrete floor coating is often used to provide an additional protective layer. Furthermore, it improves the floor’s durability, strength, and appeal. In most cases, home and business owners choose concrete coating as they are strong and affordable, but many choose it to combat regular maintenance, stains, and dust. However, finding the right concrete coating system can be strenuous as it involves factors like the floor condition, availability of professionals, costs, and the floor’s moisture content.

Benefits of concrete floor coating
A concrete floor is already an excellent choice, but adding another concrete coating on the floor can have incredible benefits, such as

Increased resistance to wear and tear
In environments such as factories and garages, a concrete floor may wear off over the years. Moreover, external factors like machinery, spills, and hot tires, can cause severe damage to the durability of a concrete floor. Hence, one can opt for a coating such as epoxy that adds an extra layer to protect the floor. This may aid in damage resistance and improve the lifespan of the floor.

A cost-effective option
Good quality concrete floor coatings are incredibly budget-friendly compared to wood, tile, and stone options. For instance, if one already has a concrete floor, they may require only a fraction materials to transform the space into something better. Furthermore, they involve minimum maintenance costs and do not crack or chip like the other floor tiling options.

Provides additional safety
Concrete coating options such as Epoxy have a shiny and mirror-like appearance but are not slippery. As a matter of fact, they are incredibly popular and ideal in safety-oriented workplaces. Furthermore, they are skid resistant and can also be mixed with specialized anti-slip additives. This provides an additional layer of safety for young kids and the elderly by preventing any possible falls.

Improved visual appearance
There are various concrete floor coatings options like acrylic, polyaspartic, and polyurethane, but some of them might not be visually appealing. Hence, at times like these, one can go for other options, such as epoxy coatings done by professionals. These concrete options can include epoxy coatings with multiple designs, colors, and texture options that can be chosen according to the needs. Furthermore, one can easily opt for the nearest one by searching for “concrete coating professionals near me.”

Resistance against moisture and stains
A concrete floor is susceptible to stains and moisture damage. Once the moisture or stains seeps through the pores on the floor, they can be incredibly difficult to remove. However, opting for concrete coatings that are solvent or water-based, can save one a lot of trouble in the future. These coatings bond tightly to the existing concrete surface and effectively seal its pores to avoid moisture buildup and stains. In addition, the extra layer also provides chemical resistance against corrosive spills and even grease stains. So, always opt for concrete coating options such as Epoxy by concrete coating professionals. The best one in the area can be chosen by looking for options that fall under “concrete coating pros near me.”

A volatile organic compound-free option
Most hardwood floors and options like vinyl and synthetic carpets contain high amounts of volatile organic compounds. These floors may release chemical toxins that are harmful to health. Furthermore, they increase indoor pollution levels as well. Hence experts suggest eco-friendly concrete coatings with no organic compounds as a more durable and toxin-free option.

Versatile utility
Concrete floors are incredibly versatile. They can be used in areas such as garages and even other outdoor areas such as the patio for more recreational use. Moreover, one can also check out elegant design options to use in hallways and rooms, and other transitional spaces in the house. Additionally, concrete coatings can also be effectively employed on the existing concrete floors during renovations to make the house more visually appealing.

Increased flexibility
Concrete floor coatings prove to be more flexible as they accommodate a wider variety of floor needs. The varied concrete coating options can be employed in places such as workshops, garages, offices, restaurants, and even houses. Moreover, they can also be used in industrial environments like factories and chemical plants. Additionally, the coating mixture is also incredibly versatile and can be chosen according to strength and color preferences, providing one with an increased amount of flexibility.

Concrete coating requirements

The need for coating
The need for a concrete coating can differ from one circumstance to another. Some may need it as protection against wear and tear or for safety reasons. At the same time, others may opt for its attractiveness and resistance to spills and stains. Hence before searching for “concrete coating professionals near me,” one needs to assess the needs and look out for the best options available.

The current floor condition
The condition of the existing concrete floor plays an important role in choosing the right concrete coating option. If any major damages are involved, experts suggest that those damages be repaired before proceeding with the concrete coating. However, some options, like Epoxy crack fillers can be employed to repair minor problems.

In addition to the above, one should also remove oil, grease, and other foreign contaminants before adding the concrete coating. Hence, it’s suggested to opt for professional services by searching “concrete coating professionals near me” and opting for the one that fits within the budget.

Revamping the living space for the festive season is an exciting household chore. It adds a fresh new look to your home, making it ready to welcome the occasion. And is there a better place than the Black Friday sale to buy home decor items? Be it area rugs or carpets, retail and e-commerce stores offer generous discounts at this time of year on almost every product. The following Black Friday carpet and area rug deals will help you revamp your living space without straining your budget.

Kafra Jkcr61l Rug
The Kafra JKcr61l is a traditional rug made from 50 percent jute and 50 percent polyester. It is a flatweave construction ideal for the bedroom, living room, hallway, dining room, and even home offices. It is available in different colors and comes in three sizes: 4’x6’, 5’x8’, and 7’6”x9’6”. With a discount of up to 30 percent, you can buy the area rug between $120 to $400 depending on the size. You may also be eligible for another 80 percent discount.

Tulsa Lea Southwestern Geometric Crimson Area Rug
This is one of the best Black Friday carpet or area rug deals on the internet. The Tulsa Lea Southwestern Geometric Crimson is a stain-resistant area rug made from polypropylene, using the power loom technique. The construction is an array of traditional Persian, Southwestern, and Moroccan design that can be matched with any decor. The area rug is available at an unbelievable discount of more than 50 percent. It comes in multiple sizes, so you can choose the one that best fits the dimensions of your living space.

Luciana Hand-Knotted Wool Gray Area rug
If you are looking for a carpet or area rug with a minimalistic design, Luciana Hand-Knotted Wool Gray Area Rug is for you. As the name suggests, it is made of wool and is hand-knotted. The rug is available in more than 20 different shapes and sizes. The smallest is 2’x3,’ weighing not more than 3lbs and the largest is 12’x18’ that weighs more than 80lbs. The various sizes, shapes, and designs of the rug make it the best choice for any living space. Being available on Black Friday carpet and area rug deals, you can buy it at a jaw-dropping 80 percent discount.

Black Friday marks the official start of the much-awaited holiday shopping season, and that means the best of brands at amazing discounts. And since most of you are working from home this year, the Black Friday sale is the perfect opportunity for you to upgrade your old sofa set, home accents, and furnishings without breaking the bank. You can shop for office essentials and convert a corner of your temporary workspace into the best home office you can imagine. Check out the best and hottest deals trending ahead of the shopping season.

Cheapest furniture deals
With prices slashed on branded furniture, it’s time to overhaul and give your home a stunning makeover. Shop for the best of urban style, contemporary living, traditional furniture, and customized furniture for family spaces. Avail the best of discounts on sofas, recliners, ottomans, coffee tables, storage options, TV stands, and media centers. With Black Friday discounts, turn your living room into a fully functional workstation with a desk, chair, and office essentials.

Hot brand deals on living room furniture
Hamilton, Mason, and Ashbury are offering some of the best reversible sectional sofa beds at great discounts. Get up to $300 off on the best of living room furniture. Need a new dining set? Oliver brings you a great deal on a 5-piece dining set that comes with a counter height kitchen table and four chairs that’ll give your living space a functional and modern look. A fully loaded Mason Power Theatre recliner can be in your living room at just $299 this Black Friday. Yes, you are reading right!

Best deals on bedroom essentials
Nordstrom brings you the best of discounts with up to 37% off on a new comforter and sham set. You can also save up to 57% on armless loveseats brought to you by Wayfair. Pottery barn also brings you an amazing range of flatware caddies at a 20% discounted rate. Don’t forget to check a new set of cotton throws by Serena & Lily available for a 43% discount. This Black Friday sale, get your hands on rugs, bedding essentials, bedroom essentials, and the latest décor items from top brands including West Elm, Saks Fifth Avenue, Layla Sleep, Helix Sleep, Buffy, and Brooklinen at cheap rates.

Happy shopping!

Buying the perfect carpet for your home is a big interior decision. In the bid to bag the best carpets at an affordable price, one will be browsing through this year’s Black Friday carpet deals. But before you step out or surf through websites for Black Friday carpet deals, there are a few things you should know. Read on to know a few key factors to consider before deciding on a carpet for the house.

Care and maintenance

All your carpets cannot be cleaned the same way, as its cleaning and maintenance depend on the carpet’s fiber and material. The safest way to clean a carpet is by using a vacuum cleaner with high suction power. However, if you have a delicate woven carpet, using a vacuum cleaner won’t be ideal. Therefore, ensure that you are clear on how to clean and maintain it before you go out to cash on the Black Friday carpet deals for 2020.

Padding type

Carpet padding is necessary if you want the carpet to last longer. The type of padding is responsible for providing carpet protection from pressure and soundproof the floor. For bedrooms, carpet with more padding is ideal as they provide higher heat insulation. Therefore, to make the most out of the carpet, you get this Black Friday, consider padding and other requirements.

Decide a budget

Black Friday Carpet deals 2020 might seem like the perfect opportunity to go all out carpet shopping. But before you step out to splurge, consider your budget. Trying to fit in a carpet to match your decor that empties your pockets is not ideal. The type, size, and material of the carpet will determine its price. But if you are looking for stain-resistant carpets, you will have to allow for a large budget.

Warranty

One of the things we often forget about while shopping during sale season is the warranty of the product. Do not make that same mistake while browsing through this year’s Black Friday carpet deals 2020. Some manufacturers offer a stain warranty and wear and tear warranty, while some don’t. Read through all the instructions and terms before you make the final decision and pick the perfect carpet that matches your decor and your budget.